Recognizing Plumbing Issues Before They Become a Problem
Many times when water damage occurs in a home or commercial property, it is due to faulty plumbing. Those without plumbing experience may have a difficult time recognizing potential issues and then addressing these issues before they become a bigger, more expensive problem.
According to thecleanplumbers.com, there are eight common causes of plumbing leaks that can lead to water damage to a property.
- Advanced Corrosion – Over an extended period of time, corrosion can damage pipes and create holes where water can escape. This is a more common issue in piping that was installed over 30 years ago.
- Degraded Seals – In order to keep connections watertight, rubber seals are used wherever the pipes are connected to the fixtures. Over time, these seals can degrade and crack, allowing water to seep out and eventually cause damage.
- Excess Water Pressure – Water pressure that is too high can actually damage the inside of the plumbing pipes and create a risk for leaks. If the pressure is extremely high, it can even cause the pipes to burst.
- Fixture Cracks – Sometimes the actual faucet or pipe that connects directly to it can crack and cause a water leak. This usually happens due to impact. One area that this is common is under the sink. When items are stored under the sink, the pipes are often repeatedly bumped and can eventually lead to pipe damage and water leaks.
- Incorrect Pipe Laying – Plumbing should be handled by knowledgeable professionals. It is very important that pipes and connectors are laid properly because small mistakes that at first may not be noticeable can cause massive water damage later.
- Pipe Joint Damage – The bends or joints where the water is redirected through the pipes are curved connectors that attach to the straight pipes on either side. Extreme temperatures and water pressure can damage these joints and lead to water damage.
- Shifted Connections – Over time, homes can shift and therefore, so can the pipes inside. If the shifts are too much, the pipe connections can break and water damage occurs.
- Untreated Clogs – It seems obvious how clogged drains can lead to backups and water damage. But how the clogs are treated can also cause pipe damage. Chemical drain cleaners are often used to unclog drains. At times these chemicals do not remove the entire clog which causes the harmful chemicals to be trapped in one spot in the pipe system. The chemicals can then eat away at the pipe, eventually causing damage and a water leak. It is safer to treat clogs with a plumbing snake or hydro-jetting.
Hopefully learning how to recognize potential plumbing problems and how to address the issues will help you avoid future water damage to your property. But in the unfortunate event that you do end up with a water damage disaster, SERVPRO of Boone County is here to help! CLICK HERE for Water Damage Emergency Tips!